Products / Auxiliary Formwork Materials Plastic Category
Special Hubs For Tie-Rots To Be Left In Concrete
They are assembled in a form to be in contact with construction steel and forms. İt is to be fixed by mackerel lock. After pouring the concrete and removing forms they are taken from the concrete. Extensions of construction steel are to be cut by oxygen; the remained cavity is to be filled by special mortar with additive.
Tie-Rot Protective Pipe Hub (Plugged Type)
İt is the hub preventing cement grout to leak in the case pipe used to keep distances fixed between reinforced concrete curtains-column and beam forms. A special plug is available to close it at the end of work.
Reduction ( Water Stopper's Cap)
In water structures, it provides the reinforcement of the construction formwork by putting special type tie-rots to two ends of the water stopper. There is protecting pipe which protect the tie-rot inside of the construction formwork.Reduction is an component that make connection between protecting pipe and water stopper.
Tie-Rot Protective Pipe Hub (Cone Hub)
It is the hub preventing cement grout to leak in the case pipe used to keep distances fixed between reinforced concrete curtains-colomn and beam forms. It may either be closed with its special plug or may be taken apart for reuse at the end of work.
Tie-Rot Protective Pipe
These are pipes ensuring to keep tie-rots used to strengthen reinforced concrete curtains-column and beam forms untouched with the concrete, to dismantle them easily and to keep distances between the forms fixed. Manufactured from hard polyethylene (PE) and unbreakable. Standard length is 3 m.
Tie-Rot Protective Pipe
These pipes are ensuring to keep tie-rots used to strengthen reinforced concrete curtains-column and beam forms untouched with concrete, to dismantle them easily and to keep unbreakable. Standard length is 20 cm.
Tie-Rot Protective Cone Pipe
These are protectors of tie-rots used to strengthen reinforced concrete curtain forms. They are manufactured able to durable to the maximum possible pressure. Since these are in conic form may be taken apart and reused several times. When taken apart, if desired the remaining empty volumes are filled with special mortar with additive by using rubber stoper in the group codes 1950090920-1950525242.
