Products / Plastic Spacers Elements
Curtain And Coloumn Type Antirust Margin Components
They have large ranges of use. They were used for long years not only in our country but also worldwide successfully. There are avaliable types for steels of all diameters. Additional width given to antirust margin where the steel fits prevents it to be overturned. Due to its cage-like structure, they do not prevent concrete flow. Due to processes at outer side they contact the form very slightly so give a good finishing.
Pile Cage Antirust Margin Components
Pile Cage Spacers are using to cast reinforced concrete piles and to improve flor. Steel Outfits are prepared suitable to pile hole which before pierced to floor. When the steel outfits is lifting down with helping the crab and the same stirrup also putting down with minimum 4-5 piecess an done each distance, pile cage spacers facilitate to make a guide duty, it provide into ground of steel outfits and also maintaint the coorrect cover when the concrete is poured or pumped.
Pre-Cast Type Antirust Margin Components
They are special types preferred in the manufacturing of pre-cast building components where carrying power is not mostly important.
Floor-Curtain Type Antirust Margin Components
They are used in floor and curtains with heavy steel outfits. They hold every dimension of steel in a big range from 6 mm to 22 mm and additional processes on points both the steel is supported and the component touches the form increases the carrying power and stability of the component.
Hooked Antirust Margin Components
They fastened with their special hooks to the crossing points of horizantally and vertically assembled steel outfits thus prevents fall down or overturn of them. They are preferred in movable and vibrating forms.
Clothespin Type Plastic Antirust Margin Components
They are suitabe to ensure antirust margin between the horizontal space of the form and construction components like flooring and beams. Types convenient to max and min antirust margin heights. They hold steels of all diameters easily and securely. They are components with high carrying power and stable.
Crescent Type Plastic Antirust Margin Components
They are suitable to ensure antirust margin between horizontal forms and construction components like flooring and beams. They are used in places where rather small antirust margins.
Crescent Type Flooring Plastic Antirust Margin Components
They serve antirust margin elements used in seperating the flooring and beam base reinforcements from the mold.
Plus Type Plastic Antirust Margin Components
They are manufactured by special design as antirust margin in assembly of mesh stells especially. They are well balanced because of the parts touching to the form as well holding two steels the same time.
Flat-Based Type Flooring Plastic Antirust Margin Components
These are special type used to ensure antirust margin in horizontal stell outfits laid down over insulation materials. The flat-base ensures the component not to sink in the insulation material, consequently the steel remains in the original place.
Table Type Plastic Antirust Margin Components
They are suitable to ensure antirust margin between the horizontal space of the form and construction components like flooring and beams. They hold steels of all diameters easily and securely. They are components with high carrying power and stable.
Chair Type Flooring Plastic Antirust Margin Components
These are well-balanced antirust margin component. They may be used in floors and horizontal steels. They do not prevent the flow of the concrete. Steel holders give possibility to be fixed at steels with various dimensions.
Special Norm Type Flooring Plastic Antirust Margin Components
They may easily be used at radial foundations and under beams. They do not overturn owing to the large sitting space. The strength is beyond disputes.
Norm Type Flooring Plastic Antirust Margin Components
They may easily be used at radial foundations and flooring steel with heavy outfits. They do not overturn owing to the large sitting space. The strength is beyond disputes.
Hard Type Norm Flooring Plastic Antirust Margin Components
They may easily be used at radial foundations and flooring steel with heavy outfits. They do not overturn owing to the large sitting space. The strenghth is beyond disputes.
Circular Type Plastic Antirust Margin Components
They ensure great ease in steel meshes to be laid in large places. By placing steel mesh on antirust margins scattered around over form surface, the job is solved. When required to used on outfits of curtains and walls yu can prevent to fall down by hanging the processes to steels at proper distance.
Parallel Type Plastic Antirust Margin Components
They are applied horizontally and vertically. They are solid inter-tie elements capable to support large spaces. When applied vertically you should prevent to fall down by hanging the processes to steels. They are 215 mm long and 30 mm wide.
Profile Type Plastic Antirust Margin Components
They are applied horizontally and vertically. They provide easiness in serial laying. Desired lenght may be obtained joining each other. When applied vertically you can prevent to fall down by hanging the processes to steels. They are 500mm longa nd 50mm wide.
Zig Zag Type Plastic Antirust Margin Components
It is a antirust magrin components ( spacer) which provide the distance between the construction formwork and construction steel form at the steel wire mesh, normal and heavt steel forms and curtain formworks. It convenience serial flooring on the formworks by laying on wide area in one meter apart. It is secure against to stroke and rollovering, it is durable to all kind formwork’s weights. The desired height is achieved by attaching to each other. The gabs and crossings on the profile help the concrete to flow uniformly.
Curtain (Mackerel) Type Antirust Margin Components
A steel bar at appropriate diameter, antirust margin fitted to both extremes. It determines distance between steel meshes, and forms and steel mesh. It is manufactured at requested dimensions.
Cork Flooring Steel Antirust Margin Components
It serves to keep outfit on upper part at floorings of cork type. Plastic cases fitted to its feet extremities prevent rusting of metals. The cross, formed on upper part gives required strenght to the component. Its tripod sits on bottom form with plastic parts on feet extremities. There is a handle between its legs ensuring distance on cork flooring. Upper outfit is to be placed on fit.
